When configuring Departments and job in AMG attendance system first you need to assign the specific Actions to the clock:

  1. Go to Devices
  2. Configure devices
  3. Add/Edit Device.
  4. Select the Device Type
  5. Work Code Action: Enter department, enter Job, select the action you would like the employee to perform on the Clock when clocking in.

 FR2000 Department and Jobs Assignment Image 1

      6. Department: allow you to assign Your FR2000 to a specified Department only. (when using this option you are determining that the clock belongs to that specified department and all clock ins are from that department only)

FR2000 Department and Jobs Assignment Image 2

       7. Press OK to save.

 

 

Instructions for setting up the FR2000 to take department/Jobs actions when employees use the biometric clock:

  1.  ON FR2000 access the menu of the clock by pressing the 6 Dots until menu opens, or you see a padlock requesting admin (please Verify) to unlock the clock.
  2. Select Work Code
  3. Select work Code Options
  4. Turn ON Work Code Required
  5. Set Input Screen Timeout(set in Seconds) B
  6. Turn ON Work Code Must Defined
  7. Press back Arrow to Save

To View workcodes in the Fr2000:

  1. ON FR2000 access the menu of the clock by pressing the 6 Dots until menu opens, or you see a padlock requesting admin (please Verify) to unlock the clock.
  2. Select Work Code
  3. New work Code Allows you to Create new work Codes directly from the clock
  4. All Work Codes allow you to View Codes sent from the AMG attendance system
  5. Select the work Code to Edit or Delete from the clock

 

Steps Employees will take to Clock into A Specified Department/Job:

  1. Employee Places Finger on scanner Work Code List will Show employee must select or search the Job/Department necessary when clocking in.